Manual Collet / Nut Router Spindle Motors

• Motor Packages Includes: Motor, variable frequency drive, collet, nut, and 3 phase reactor

• High torque design with higher horsepower in a smaller frame than other competing motors.
• Superior quality copper rotor.
• A superior cooling fan design. Minimum working temperatures providing superior bearing life.
• Lower load loss and absorbed current for increased energy savings.
• Dynamically balanced rotor to ISO tolerances.
• Sealed for life ABEC 7 spindle grade bearings.  Normally 3-4 bearings per motor.
• Spindle speeds to maximum 24,000 RPM.  Minimum recommended speed of 7000 RPM. Motors have been used at slower speeds with external cooling fan.
• IP50 is standard protecting from dust.  IP55 Enclosure available as an option as shown in the picture above with air purge tubing.  No warranty for moisture proof is provided, however, as we cannot be certain the motor is always receiving dry air purge.  See details on enclosure ratings.
• We are stocking some motors at 230V and some motors at 380V. A 460 VAC drive can operate both voltage options. A 230 VAC drive can operate the 230V motors. We can provide drives that accept 220VAC / 1 Ph to output 220VAC / 3Ph to our motors up to 5 HP. We can provide drives that accept 110VAC / 1Ph to output 220VAC / 3Ph to our motors up to 1.5 HP.
• All motors, except for Model SM-CAF46, incorporate dual angular contact thrust bearings at the tool area for higher thrust load capability.
• Labyrinth sealing arrangement add to to the bearing protection provide by the sealed bearings.
• Left hand thread rotation (often used to prevent product from “tearing” during cutting process), is available on the SM-C54.
• SAWM models are high speed saw arbor design motors, complete with saw flanges and nut.