DR7000331 Angular contact bearing
DR7001191 Needle roller bearing
DR7000009M Dust Grind Taper – Manual spindle motor or live tool
DR7002181 Dust grind seal area
DR7001854M Plate & Grind Journal – Manual spindle motor or live tool
DR7000024 Misc. Seals / Grease / etc…
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

• The upper spindle journal diameter is worn. We recommend plating and grinding this area. The seal area on the journal is worn. We recommend dust grinding this area.
• The bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
• The taper is pitted. We recommend dust grinding the taper.
• The bearings show some wear on the inner and outer diameters.
• The unit will be assembled and tested.