Benz aggregate head repair 728WGX005051718
Benz aggregate head repair 728WGX005051718
DR7001087 Angular contact bearing
DR7000235 Angular contact bearing
DR7001210 Angular contact bearing
DR7002134 Angular contact bearing
DR7001822 Deep groove bearing
DR7000009M Dust Grind Taper – Manual spindle motor or live tool
DR7002505 Benz – Gear, Crown
DR7002506 Benz – Gear, Pinion
DR7002507 Benz – Gear, Drive Pinion
DR7002508 Benz – Gear, Drive Pinion
DR7000024 Bore & bush housing; clean up rough spots in gear pockets
DR7000024 Misc. Seals / Grease / etc…
DR7000041 Spindle Repair Labor And Assy
Inspection Results:
- The spindle journal diameters show no appreciable wear and are acceptable for proper bearing fits.
- The bore for one of the bearings is oversized on the housing. We recommend boring and bushing this area. The gear pockets on the housing were damaged by the gears. We will smooth out the rough spots so that it can be used.
- The taper runout is larger than design specifications. We recommend dust grinding the taper.
- The bearings show some wear on the inner and outer diameters.
- All 4 gears are broke or damaged. We recommend replacing all 4 gears.
- The unit will be assembled and tested.