DR7001210 Angular contact bearing
DR7000924 Angular contact bearing
DR7000009M Dust Grind Taper – Manual spindle motor or live tool
DR7002181 Dust grind seal area
DR7000024 Misc. Seals / Grease / etc…
DR7041Live Live Tool Repair Labor And Assy
***THE ITEM WILL BE SCRAPPED IF AN ORDER IS NOT PLACED
WITHIN 60 DAYS OF QUOTATION AND WE HAVE NOT BEEN
NOTIFIED TO SHIP THE ITEM BACK.
***Repair proposal R20241213
***GSC1310,18K16047AB
We are pleased to provide our repair proposal for the subject unit. Below is a
detailed pricing summary for your reference.
Inspection Results
The spindle journal diameters show no appreciable wear and are acceptable
for proper bearing fits. The seal area is worn. We recommend dust grinding
this area. There is a chip on the end of the shaft.
The bearing housing inner diameter meets design specifications and shows no
appreciable wear. No modification is required.
The taper runout is larger than design specifications. We recommend dust
grinding the taper.
The bearings show some wear on the inner and outer diameters.
The drive gear shows some wear. We will leave as is.
The unit will be assembled and tested.