GSC 310, 9G018, 5000rpm
DR7001868 Angular contact bearing
DR7001303 Angular contact bearing
DR7000009M Dust Grind Taper – Manual spindle motor or live tool
DR7000024 Misc. Seals / Grease / etc…
DR7000041 Spindle Repair Labor And Assy
Inspection Results:
•The upper journal is worn and undersized. We recommend plating and grinding this area.
•The upper bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The lower bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The taper runout is larger than design specifications. We recommend dust grinding the taper.
•The bearings show some wear on the inner and outer diameters.
•The unit will be assembled and tested.