CMS spindle repair

CMS spindle repair

13.5kW 15000rpm 350v 500 Hz spindle repair

CMS spindle repair

CMS spindle repair

DR7001150 Lower bearing
DR7000337 Upper bearing
DR7001384 Disc spring
DR7000024 Misc. Seals / Grease / etc…
DR7000087 Dynamic Balance Rotating Part
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

•The spindle journal diameters show no appreciable wear and are acceptable for proper bearing fits.
•The upper bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The lower bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The taper runout is acceptable. Our proposal provides no repair to the spindle taper.
•The upper and lower bearings show some wear on the inner and outer diameters.
•The disc springs are rusty and need to be replaced.
•The stator passed the phase and insulation tests.
•The proximity switches work fine and will be set at time of assembly.
•The unit will be assembled and tested.