HSD MT

HSD MT 1090-100 with HSK 50D adapter flange for tool change, 2016019931, 4.7 HP, 18000rpm, 380v, 300 Hz

1090-100 with HSK 50D adapter flange for tool change, 2016019931, 4.7 HP, 18000rpm, 380v, 300 Hz

HSD MT 1090-100 with HSK 50D adapter flange for tool change, 2016019931, 4.7 HP, 18000rpm, 380v, 300 Hz

DR7000032 Lower bearing
DR7000447 Upper bearing
DR7002104 Gripper, HSK-50D
DR7000087 Dynamic Balance Rotating Part
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

•The spindle journal diameters show no appreciable wear and are acceptable for proper bearing fits.
•The upper bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The lower bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The taper runout is acceptable. Our proposal provides no repair to the spindle taper.
•The upper and lower bearings show some wear on the inner and outer diameters.
•The gripper is worn and will be replaced.
•The stator passed the phase and insulation tests.
•The unit will be assembled and tested.