DR7001442 Lower bearing
DR7000981 Upper bearing
DR7000009M Dust Grind Taper – Manual spindle motor or live tool
DR7000024 Misc. Seals / Grease / disc springs, etc…
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

•The spindle journal diameters show no appreciable wear and are acceptable for proper bearing fits.
•The upper bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The lower bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The taper runout is larger than design specifications. We recommend dust grinding the taper.
•The upper and lower bearings show some wear on the inner and outer diameters.
•The disc springs are worn and will be replaced.
•The stator passed the phase and insulation tests.
•The unit will be assembled and tested.