DR7000103 Lower & upper bearing
DR7000009ATC Dust Grind Taper – ATC spindle
DR7000629 Gripper, ISO 30, Male
DR7000087 Dynamic Balance Rotating Part
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

•The upper bearing housing inner diameter meets design specifications and
shows no appreciable wear. No modification is required.

•The lower bearing housing inner diameter meets design specifications and
shows no appreciable wear. No modification is required.

•The taper runout is acceptable. The taper has some rust. We recommend
dust grinding the taper.

•The upper and lower bearings show some wear on the inner and outer
diameters.

•The gripper is missing and will be replaced.

•The stator passed the phase and insulation tests.

•The proximity switches work fine and will be set at time of assembly.

•The unit will be assembled and tested.