DR9003492 Lower bearing
DR7000790 Upper bearing
DR7000024 Lower nut
DR7000024 Misc. bolts, etc..
DR7000087 Dynamic Balance Rotating Part
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

• The spindle journal diameters show no appreciable wear and are acceptable for proper bearing fits.
• The upper bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
• The lower bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
• The taper runout is acceptable. Our proposal provides no repair to the spindle taper.
• The upper and lower bearings show some wear on the inner and outer diameters.
• The lower nut was stuck on the threads and had to be cut off. We will make a new nut.
• The unit will be assembled and tested.