C40PH-ER32-205, 377WD00207E6, 2-8281, 3000rpm

Lyndex, C40PH-ER32-205, 377WD00207E6, 2-8281, 3000rpm

DR7000997 Angular contact bearing
DR7000892 Angular contact bearing
DR7001138 Bearing
DR7002434 Bearing
DR7001084 Deep groove bearing
DR7001433 Needle roller bearing
DR7000009M Dust Grind Taper – Manual spindle motor or live tool
DR7001854M Plate & Grind Journal – Manual spindle motor or live tool
DR7000024 Bearing nut
DR7000024 Labyrinth ring
DR7000024 Misc. Seals / Grease / spacers, nuts, bolts, etc…
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

•One of the spindle journal diameters shows some wear. We recommend plating and grinding this area.
•The bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The taper runout is larger than design specifications. We recommend dust grinding the taper.
•The bearings show some wear on the inner and outer diameters.
•The bearing nut and labyrinth rings will be replaced.
•We will replaced the missing bolts and nuts.
•The gears are in good shape and show little wear.
•The unit will be assembled and tested.