DR7000868 Lower & upper bearing
DR7000501 HSK63F Gripper
DR7002312 Omlat encoder
DR7002313 Omlat complete connector set
DR7000087 Dynamic Balance Rotating Part
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

• The spindle journal diameters show no appreciable wear and are acceptable for proper bearing fits.
• The upper bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
• The lower bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
• The taper runout is acceptable. Our proposal provides no repair to the spindle taper.
• The upper and lower bearings show some wear on the inner and outer diameters.
• The tool pressure is low and the gripper is worn. We recommend replacing the gripper.
• The stator passed the phase and insulation tests.
• The proximity switches work fine and will be set at time of assembly.
• We will replace the connectors and encoders.
• The unit will be assembled and tested.