DR7000263 Lower bearing
DR7001365 Upper bearing
DR7000745 Deep groove bearing
DR7000009M Plate & Grind Taper – Manual spindle motor or live tool
DR7001854M Plate & Grind Journal – Manual spindle motor or live tool
DR7000024 Bearing nut
DR7000087 Dynamic Balance Rotating Part
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

•The lower spindle journal diameters shows some wear. We recommend plating and grinding this area.
•The upper bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The lower bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The taper is worn and pitted. We recommend plating and grinding the taper.
•The upper and lower bearings show some wear on the inner and outer diameters.
•The stator passed the phase and insulation tests.
•The upper bearing nut is cracked. We will make a new nut.
•The unit will be assembled and tested.