Shoda  

 NC5164-1632, s/n 462A60301, 200v, 16000rpm

R188212 Lower bearing 1 427.00 427.00
DR7000405 Upper bearing 1 320.00 320.00
DR7000009ATC Dust Grind Taper – ATC spindle 1 250.00 250.00
DR7001854ATC Plate & Grind Journal – ATC spindle 2 450.00 900.00
DR7000039 Bearing Cartridge Repair 2 370.00 740.00
DR7000087 Dynamic Balance Rotating Part 1 210.00 210.00
DR7000041 Spindle Repair Labor And Assy 20 115.00 2,300.00

Inspection Results:

  • The lower & upper spindle journal diameters are worn and undersized forproper bearing fits. We recommend plating and grinding lower & upper journal.
  • The upper bearing housing inner diameter is larger than design specifications and shows some wear. We recommend plating and grinding the upper housing.
  • The lower bearing housing inner diameter is larger than design specifications and shows some wear. We recommend plating and grinding the upper housing.
  • The taper shows some wear. We recommend dust grinding the taper.
  • The upper and lower bearings show some wear on the inner and outer diameters.
  • The tool pressure test checks fine.
  • The stator passed the phase and insulation tests.
  • The proximity switches work fine and will be set at time of assembly.
  • The unit will be assembled and tested.
Comments are closed.