DR7002233 Angular contact bearing
DR7001071 Angular contact bearing
DR7000024 Misc. Seals / Grease / etc…
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

• The spindle journal diameters show no appreciable wear and are acceptable for proper bearing fits. The seal area on the shaft is worn. We recommend dust grinding this area.
• The bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
• The taper runout is acceptable. Our proposal provides no repair to the spindle taper.
• The bearings show some wear on the inner and outer diameters.
• The gears are in good shape and show little wear.
• The unit will be assembled and tested.