VMC

80/30, 9511284

VMC 80/30, 9511284

DR7000610 Lower bearing
DR7001859 Upper bearing
DR7000024 Drawbar pusher
DR7000024 Gripper balls
DR7000087 Dynamic Balance Rotating Part
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

•The spindle journal diameters show no appreciable wear and are acceptable for proper bearing fits.
•The upper bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The lower bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required.
•The taper runout is acceptable. Our proposal provides no repair to the spindle taper.
•The upper and lower bearings show some wear on the inner and outer diameters.
•The drawbar pusher is broke. We will make a new part.
•The gripper balls are worn and will be replaced.
•The unit will be assembled and tested.

Comments are closed.