DR7001429 Lower bearing
DR7000909 Upper bearing
DR7001854ATC Plate & Grind Journal – ATC spindle
DR7000087 Dynamic Balance Rotating Part
DR7000041 Spindle Repair Labor And Assy

Inspection Results:

• The lower spindle journal diameter is worn and undersized. The lower
  journal also has runout where the bearings sit. We recommend plating and
  grinding this area.
• The upper bearing housing inner diameter meets design specifications and
  shows no appreciable wear. No modification is required.
• The lower bearing housing inner diameter meets design specifications and
  shows no appreciable wear. No modification is required.
• The taper runout is acceptable. Our proposal provides no repair to the
  spindle taper.
• The upper and lower bearings show some wear on the inner and outer
  diameters.
• The unit will be assembled and tested.