We specialize in the repair of Hurco spindle motors, Hurco motors, and Hurco spindles.  Our repairs will typically cost 1/2, or less than 1/2 the price of a new spindle.  Plus, we upgrade the original non-sealed bearing design, to a sealed / shielded bearing design at all bearing locations.  We keep bearings in stock for these motors to allow us to keep pace with our repair volume.  Lead-time can be as short as 2-3 days.  Contact us for new manual collet and nut spindles or automatic tool change spindles as well.

Four factors are of primary importance when rebuilding a high speed router operating at 10,000 to 30,000 RPM.

  1. The condition of the machine before the rebuild along with accurately diagnosing any and all problems.
  2. Installing proper replacement parts including spindle grade bearings and parts with OEM tolerances that are known only to OEM’s such as Ekstrom-Carlson.  We are not simply a machine shop or an electrical rewind shop.
  3. Precision tolerance machinery and tooling including grinding, plating and balancing equipment.
  4. Experience and quality workmanship of the repair technician.

At Ekstrom-Carlson, a complete factory rebuild includes a thorough inspection and a detailed repair quotation based on the supply of new parts from stock (when available). Comparison of parts to detailed prints, when required, ensures that no corners are cut.  All spindle rotating elements are balanced to ISO G2.5 tolerances or better, the best in the industry.  Re-balancing is critical, even on “simple bearing replacement repairs.”

New parts to original design specifications will be installed by our Service Technicians for complete unit responsibility.

Hurco Spindle Repair • Case Studies

Hurco, VMX42, HS601273

Hurco, VMX42, HS601273 DR7001359 Upper bearing DR7000087 Dynamic Balance Rotating Part DR7000041 Spindle Repair Labor And Assy Inspection Results: One set of bearings are bad and need to be replaced. The unit will be assembled and tested.

Hurco

HS101724, VM1-0602101GBGA, 8000rpm DR7000951 Lower bearing DR7000426 Upper bearing DR7000949 Disk spring DR7000087 Dynamic Balance Rotating Part DR7000041 Spindle Repair Labor And Assy Inspection Results: •The spindle journal diameters show no appreciable wear and are acceptable for proper bearing fits. •The upper bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required. •The lower ... Read More

Hurco Spindle Repair

VMIG, 06001048AJA DR7002116 Lower bearing DR7001453 Upper bearing DR7000087 Dynamic Balance Rotating Part DR7000041 Spindle Repair Labor And Assy Inspection Results: •The spindle journal diameters show no appreciable wear and are acceptable for proper bearing fits. •The upper bearing housing inner diameter meets design specifications and shows no appreciable wear. No modification is required. •The lower bearing housing inner diameter ... Read More

Contact Us Today • We Respond Fast

Need more information? Are you ready for your free inspection? Send us a message and we will get back to you ASAP.